Bateau 23

The Bateau 23 offers the capacity for larger groups of fisherman and outdoor enthusiasts. The 23 has the size, weight and freeboard to leave the sound’s protected waters to head ocean-side on nicer days. T-Tops are often added to the Bateau 23 for extended days on the water.

The Beach Barbeques – On the NC Coast near the Jones Brothers factory, it’s common to see family or group barbeques taking place on the nearby islands and sandbars. These are not your typical backyard variety BBQs, but more akin to the Southern football tail-gating tradition – think whole pigs and chickens. The Bateau 23 is a favorite for it’s ability to move loads of people, cookers, ATVs, or tow kayaks or a jet ski – hopefully not all at once.

Length22’ 7”
Beam8′ 7″
Floor Width6′ 1″
Fuel Capacity25 gallons
Rec HP115
Max HP115
Shaft Length25″
Hull Weight1950 lbs.
Person Capacity11
Person Load1650 lbs.

Fuel & Electrical

  • 25 Gallon Built In Fuel Tank
  • LED Pop-Up Bow Light
  • LED Lights (Cockpit, Navigation and Anchor)
  • Battery, Tray and Wiring Harness to Console
  • Six Gang Booted Switch Panel
  • Ten Blade Fuse Block


  • Super Fish Console (STD)
  • Super Fish Windshield
  • SeaStar Hydraulic Steering
  • Stainless Steel Steering Wheel
  • Console Grab Rail
  • Console Fold-Down Storage Hatch
  • USB Accessory Outlet

Hull, Deck & Cockpit

  • 100% Composite Construction
  • Fiber Glass Stringer Grid
  • Self Bailing Cockpit
  • Accu-Track Hull for Sure Turning and Handling
  • Molded Gunwales
  • Under Gunwale Poly Rod Racks
  • Automatic Bilge Pump
  • Flush Anchor Locker
  • Foam Flotation
  • Pull-Up Bow Cleat
  • Heavy Duty Rub Rail/SS Insert
  • Jump Seats
  • Non-Skid Gunwales and Cockpit
  • Rigging Conduit Beneath the Floor
  • Stainless Steel Fuel Fill
  • Standard Nylon Cleats (Stern)


Jones Brothers exclusively uses Yamaha engines and accessories when rigging boats. The following engines are available on the Bateau 23:

  • Yamaha F115XB or F150XC 4-Stroke Engine
  • Package includes complete instrumentation, stainless steel propeller, rigging and 10 micron stainless steel fuel filter

For more information, examine the Jones Brothers engine options and rigging pages.

Yamaha PowerMatched™ System Warranty

All boats built by Jones Brothers Marine qualify for the Yamaha PowerMatched™ System warranty. This gives buyers a warranty on the entire power system, which matches the three year warranty that comes with the four stroke engine. In addition to the engine warranty, the PowerMatched warranty includes:

  • Digital Gauges
  • Ignition Switch
  • Controls
  • Wiring Harness
  • Fuel Filter
  • Control Cables
  • Stainless Steel Propeller

Options (chart)

  • 12″ Hand Rails
  • Bimini Top
  • Box Seat
  • Box Seat Cushion
  • Compass (Ritchie HF742) – Flush Mounted
  • Console Cooler
  • Console Cover – Half
  • Console Cover – Full
  • Console Cushion Set
  • Console Fly Rod Holders
  • Console Rod Rack (Aluminum)
  • Console Upper Storage Box
  • Console Upper Storage Box with Electronics Flush Kit
  • Custom Hull Color
  • Dash Storage Box
  • Dual Batteries, Trays, Switches and Wiring Harness
  • Edson Steering Wheel
  • Extra USB Accessory Outlet
  • Flush Mounted Rod Holders
  • Jump Seat Cushions
  • Lean Post – Aluminum with Storage Box
  • Lean Post – Fiberglass (SM) no Livewell
  • Lean Post – Fiberglass (STD) with Livewell
  • Lean Post Backrest without Rocket Launchers
  • Lean Post Backrest with Rocket Launchers
  • Lean Post Cover for Aluminum LP
  • Lean Post Cover for Fiberglass LP
  • Livewell – Port Jump Seat
  • Olive Drab Hull & Accessories
  • Pull-Up Spring Line Cleats
  • Pull-Up Stern Cleats
  • Reversible Back Seat Assembly
  • Swim Platform
  • T-Top Enclosure
  • T-Top with Rocket Launchers
  • Trolling Motor Wiring
  • Washdown System

Disclaimer – Due to the price volatility of marine components and accessories, the prices in the Quick Quote estimator may not always be accurate. While Jones Brothers tries to maintain accurate information on the website, the prices should be considered “estimates.” For an official quote, please continue to the last page in the estimator. This optional step emails your contact information and boat configuration to a company representative.

Previous slide
Next slide

On hand-held devices, please rotate the device sideways to view full images.

Bennett Electric Trim Tabs

Previous slide
Next slide

Jump Seat Cushions

Previous slide
Next slide

Casting Platform Cushion (Bow)

Previous slide
Next slide

Lean Post Cover for Aluminum LP

Previous slide
Next slide

Console Cooler

Seafoam Green
Olive Drab
Ice Blue
Fighting Lady Yellow
Flag Blue
Previous slide
Next slide

Custom Hull Colors


Olive Drab Hull & Accessories

Previous slide
Next slide

Bimini Top

Previous slide
Next slide

USB Accessory Outlet – Note: There are two USB ports in the USB outlet.

Previous slide
Next slide

Edson Steering Wheel


Console Fly Rod Holders

Lean Post Cover for Fiberglass LP

Previous slide
Next slide

Console Cover – Full

Previous slide
Next slide

Dual Batteries, Trays, Switches and Wiring Harness

Previous slide
Next slide

Washdown System


Box Seat with Cushion


Removable Leaning Post – This option is only available on the Cape Fisherman 20/23 with the optional forward casting deck.

Pop-Up Pole Mounts

Poling Platform (Aluminum)


Custom Hull 2Tone with Boot Stripe

Previous slide
Next slide

Casting Platform/Fish Box Forward

Previous slide
Next slide

Compass (Ritchie HF742) – Flush Mounted

T-Top Enclosure


T-Top with Rocket Launchers


12″ Aluminum Hand Rails

Previous slide
Next slide

Pull-Up Spring Line Cleats


Removable Lean Post Backrest with Rocket Launchers

Previous slide
Next slide

Lean Post – Aluminum with Storage Box

Previous slide
Next slide

Extra USB Accessory Outlet – Note: There are two USB ports in the USB outlet.

Dash Storage Box

Previous slide
Next slide

Console Upper Storage Box

Console Rod Rack


Console Cushion Set

Console Cover – Half

Swim Platform