Cape Fisherman 20

The Cape Fisherman 20 comfortably handles three anglers, or more if you share well, and is economical to run. The 20 is easily towed and can be self-launched. For family boating, consider adding the forward casting deck to provide seating for a boatload of kids, and increase storage capacity for camping and beach gear.

Length20′ 4″
Beam8′
Cockpit Depth23″ at stern
Dead Rise14° at transom
Fuel Capacity51 gallons
Rec HP150
Max HP200
Shaft Length25″
Hull Weight2000 lbs.
Draft12″
Person Capacity9
Person Load1275 lbs.
Max Load1860 lbs.

Fuel & Electrical

  • 51 Gallon Fuel Tank
  • Bennett Electric Trim Tabs
  • LED Pop-Up Bow Light
  • LED Lights (Cockpit, Navigation and Anchor)
  • Battery, Tray and Wiring Harness to Console
  • Six Gang Booted Switch Panel
  • Ten Gang Fuse Block

Console

  • Super Fish Console (STD)
  • Super Fish Windshield
  • SeaStar Hydraulic Steering
  • Stainless Steel Steering Wheel
  • Console Grab Rail
  • Ritchie Compass
  • Console Fold-Down Storage Hatch
  • USB Accessory Outlet

Fishing Features

  • Four Stainless Steel Rod Holders
  • Under Gunwale Poly Rod Racks

Hull, Deck & Cockpit

  • 100% Composite Construction
  • Fiber Glass Stringer Grid
  • Self Bailing Cockpit
  • Automatic Bilge Pump
  • Flush Anchor Locker
  • Foam Flotation
  • Three Pull-Up Cleats
  • Heavy Duty Rub Rail/SS Insert
  • Jump Seats
  • Non-Skid Gunwales and Cockpit
  • Rigging Conduit Beneath the Floor
  • Stainless Steel Fuel Fill

Power

Jones Brothers exclusively uses Yamaha engines and accessories when rigging boats. The following engines are available on the Cape Fisherman 20:

  • Yamaha F150XC, F200XC or F200XSA 4-Stroke Engine
  • Package includes complete instrumentation, stainless steel propeller, rigging and 10 micron stainless steel fuel filter

For more information, examine the Jones Brothers engine options and rigging pages.

Yamaha PowerMatchedâ„¢ System Warranty

All boats built by Jones Brothers Marine qualify for the Yamaha PowerMatched™ System warranty. This gives buyers a warranty on the entire power system, which matches the three year warranty that comes with the four stroke engine. In addition to the engine warranty, the PowerMatched warranty includes:

  • Digital Gauges
  • Ignition Switch
  • Controls
  • Wiring Harness
  • Fuel Filter
  • Control Cables
  • Stainless Steel Propeller

Options (chart)

  • 12″ Hand Rails
  • Bimini Top
  • Casting Platform Cushion (Bow)
  • Casting Platform/Fish Box Forward
  • Console Cooler
  • Console Cover – Half
  • Console Cover – Full
  • Console Cushion Set
  • Console Fly Rod Holders
  • Console Rod Rack (Aluminum)
  • Console Upper Storage Box
  • Console Upper Storage Box with Electronics Flush Kit
  • Custom Hull Color
  • Custom Hull Two-Tone w/Boot Stripe
  • Dash Storage Box
  • Dual Batteries, Trays, Switches and Wiring Harness
  • Edson Steering Wheel
  • Extra USB Accessory Outlet
  • Helm Master EX Kit – Joy Stick
  • Helm Master EX Kit + Joy Stick
  • Jump Seat Cushions
  • Lean Post – Aluminum with Storage Box
  • Lean Post – Fiberglass (SM) no Livewell
  • Lean Post – Fiberglass (SM) with Livewell
  • Lean Post Backrest without Rocket Launchers
  • Lean Post Backrest with Rocket Launchers
  • Lean Post Cover for Aluminum LP
  • Lean Post Cover for Fiberglass LP
  • Olive Drab Hull & Accessories
  • Pull-Up Spring Line Cleats
  • Removable Leaning Post
  • Swim Platform
  • T-Top Enclosure
  • T-Top with Rocket Launchers
  • Trolling Motor Wiring with Rub Rail Nav. Lights
  • Washdown System

Disclaimer – Due to the price volatility of marine components and accessories, the prices in the Quick Quote estimator may not always be accurate. While Jones Brothers tries to maintain accurate information on the website, the prices should be considered “estimates.” For an official quote, please continue to the last page in the estimator. This optional step emails your contact information and boat configuration to a company representative.

Previous slide
Next slide

On hand-held devices, please rotate the device sideways to view full images.

Bennett Electric Trim Tabs

Previous slide
Next slide

Jump Seat Cushions

Previous slide
Next slide

Casting Platform Cushion (Bow)

Previous slide
Next slide

Lean Post Cover for Aluminum LP

Previous slide
Next slide

Console Cooler

Seafoam Green
Olive Drab
Ice Blue
Fighting Lady Yellow
Flag Blue
Previous slide
Next slide

Custom Hull Colors

b17-olive-drab2

Olive Drab Hull & Accessories

Previous slide
Next slide

Bimini Top

Previous slide
Next slide

USB Accessory Outlet – Note: There are two USB ports in the USB outlet.

Previous slide
Next slide

Edson Steering Wheel

IMG_0306

Console Fly Rod Holders

Lean Post Cover for Fiberglass LP

Previous slide
Next slide

Console Cover – Full

Previous slide
Next slide

Dual Batteries, Trays, Switches and Wiring Harness

Previous slide
Next slide

Washdown System

box_seat_cushion

Box Seat with Cushion

removable_leanpost-01

Removable Leaning Post – This option is only available on the Cape Fisherman 20/23 with the optional forward casting deck.

Pop-Up Pole Mounts

Poling Platform (Aluminum)

custom_hull_2tone-03

Custom Hull 2Tone with Boot Stripe

Previous slide
Next slide

Casting Platform/Fish Box Forward

Previous slide
Next slide

Compass (Ritchie HF742) – Flush Mounted

T-Top Enclosure

t-top-04

T-Top with Rocket Launchers

stainless_hand_rails-02

12″ Aluminum Hand Rails

Previous slide
Next slide

Pull-Up Spring Line Cleats

lean_post_backrest-03

Removable Lean Post Backrest with Rocket Launchers

Previous slide
Next slide

Lean Post – Aluminum with Storage Box

Previous slide
Next slide

Extra USB Accessory Outlet – Note: There are two USB ports in the USB outlet.

Dash Storage Box

Previous slide
Next slide

Console Upper Storage Box

Console Rod Rack

console_cushion_set-02

Console Cushion Set

Console Cover – Half

Swim Platform